How to Do it Yourself Aerial Extension TV Kits

Do-it-yourself aerial extension television kits usually contain three main parts – coaxial cable, paper clip, and fly-lead. If you’re unsure of what you need, read our tips and tricks. You’ll be amazed at how easy it can be to extend your aerial television. But be careful! The wires can be sharp! If you don’t do it right, you may experience several problems.

Coaxial Cable

If you want to extend the length of your television aerial, you can do it yourself with the help of a coaxial cable extension adapter. This device helps you to extend the cable to any length and to any room. It is also a time and money saver. To install the coaxial cable extension adapter, you must first measure the area to that you want to extend the cable. Be sure to measure the area accurately and aim for a higher number than you need. Once you’ve measured the distance, you can cut the cable to the required length. However, if you don’t know this number, you may need to buy an extension adapter or an additional cable.

Coaxial cable extension tools come with a set of connectors on the end. To make the extension, you will need to cut the cable in half with diagonal cutters. The cable is thick and can be cut three to four times. One end of the cable has a connector that plugs into the TV’s antenna connector. To install the coaxial cable extension, you should cut a hole in the PVC jacket that’s about 1/4 inch wide.

You can purchase TV aerial extension kits or use a paper clip as an antenna. Then, you can attach the cable to the metal clothes hanger. You can also use a coaxial cable with the paper clip antenna. This type of antenna can be easily moved around. The other way to connect the coaxial cable with the coaxial cable is to place the connector on the window sill. In this way, you can adjust the cable length to the desired length.

Before attempting to install the coaxial cable, you should know what you’re doing. If you don’t understand the basics of electrical wiring, you’re better off hiring a professional electrician. If you don’t have any knowledge about your home’s grounding system, you can risk electrocution, damaged electronics, and even house fires. Therefore, it is advisable to consult aerial fitters at to install the cable.

Paper Clip

A paper clip has multiple uses. It’s a versatile tool that can boost the signal of a walkie-talkie or radio in emergency situations, dangerous places, and survival situations. In addition to this practical use, it can serve as a reading page marker and a fire starter.

A paperclip is an extremely low-cost antenna. It can pick up a few channels depending on where you live, and can also be used to pick up digital and HDTV for free over the air. To install a paper clip TV antenna, it should be placed close to a window and facing the TV tower. Alternatively, you can use a metal ring to attach a cable to the paperclip.


A Fly-lead aerial extension is a cable that connects your TV aerial input to a wall socket on your television. This cable then transmits the television signal so you can watch it. These extensions are useful for new television installations and retrofit projects alike. Fly-lead aerials are available in different lengths to suit your needs. Here are some tips to find the right one for your TV installation project.

A fly-lead is made of four components: a single one-mm-thick copper conductor, a foam polyethylene dielectric, copper foil tape, and a black PVC sheath. These parts are all made of double-screened, high-quality cable. They are also fitted with screw-off Male-to-Male connectors. They are all of the high quality, with no traces of corrosion or other issues.


You might have heard horror stories about people trying to do it themselves with aerial extension TV kits. There are a number of potential problems with this type of kit, and the following article outlines some of the most common ones. It is vital to check your instructions thoroughly to avoid any issues. Make sure that the extension is securely attached to the TV before you start. If the aerial is not attached, the cable may come loose.

The TV will be unable to display images if you have a problem with the signal. The cause of this problem will depend on the exact type of signal your set receives. If the signal is erratic or nonexistent, it might be because the cable has been damaged, or the signal has been scrambled by interference. In either case, you should check the cable for water ingress. If this is the case, you should replace the cable with a new one.

Another common problem is a poor signal. When you use a TV with a damaged aerial, the signal may not reach the television as expected. This issue is referred to as ghosting. It occurs when two paths to the television receive the same signal at different times, so repositioning the aerial is necessary to correct the problem. A professional will check your aerial and fix any problems that you may have.